How to fix error code 0x80070035 “The network path was not found” on Windows 11

What is error code 0x80070035

Error code 0x80070035, commonly accompanied by the message “The network path was not found,” can be a frustrating issue encountered by Windows 11 users when attempting to access shared files or folders on a network. This error typically indicates a problem with network connectivity or configuration, preventing your computer from locating the desired network path. When encountering error code 0x80070035, it is essential to troubleshoot the underlying causes to restore network functionality. Fortunately, there are several solutions you can try to address this error and regain access to shared resources on your network. In this article, we will guide you through a series of steps to resolve error code 0x80070035 on Windows 11. Whether you are encountering this error while attempting to connect to a shared printer, access files on another computer, or browse network resources, the following troubleshooting methods can help you identify and rectify the issue. By following these steps, you can restore the proper functioning of your network connection and eliminate the “The network path was not found” error on your Windows 11 system.

1. Enable Network Discovery and File Sharing:

First, ensure that network discovery and file sharing are enabled on your Windows 11 PC. To do this, follow these steps:

1. Go to the Start menu and open the Settings app.
2. Click on Network & Internet and select Network and Sharing Center.
3. Under the Advanced sharing settings section, make sure that network discovery and file sharing are turned on.

2. Enable SMB 1.0/CIFS File Sharing Support:

Sometimes, enabling SMB 1.0/CIFS file sharing support can resolve the network path not found error. Here’s how you can enable it:

1. Open the Control Panel on your Windows 11 PC.
2. Go to Programs and click on Turn Windows features on or off.
3. Scroll down and locate SMB 1.0/CIFS File Sharing Support. Check the box to enable it and click OK.

3. Enable NetBIOS over TCP/IP:

NetBIOS over TCP/IP allows Windows to communicate with other devices on the network. Enabling it might help fix error code 0x80070035. Follow these steps:

1. Open the Control Panel and navigate to Network and Internet > Network and Sharing Center.
2. Click on your active network connection, then click on Properties.
3. In the Networking tab, select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
4. Click on the Advanced button and go to the WINS tab.
5. Under NetBIOS setting, select Enable NetBIOS over TCP/IP and click OK.

4. Set the TCP/IP NetBIOS Helper Service to Start Automatically:

Ensuring that the TCP/IP NetBIOS Helper service starts automatically can help resolve network path errors. Here’s how you can set it up:

1. Press the Windows key + R to open the Run dialog box.
2. Type services.msc and press Enter to open the Services window.
3. Scroll down and locate TCP/IP NetBIOS Helper.
4. Right-click on it and select Properties.
5. Under the General tab, set the Startup type to Automatic and click OK.

5. Modify LAN Manager Authentication Level:

Adjusting the LAN Manager Authentication Level can often fix error code 0x80070035. Follow these steps:

1. Press the Windows key + R, type secpol.msc, and hit Enter to open the Local Security Policy.
2. Expand Local Policies and click on Security Options.
3. Locate Network security: LAN Manager authentication level in the right pane and double-click on it.
4. Select the option Send LM & NTLM – use NTLMv2 session security if negotiated.
5. Click OK to save the changes.

6. Remove Terminal Server Licenses From an RDP Client:

If you have connected to a Remote Desktop Protocol (RDP) server before encountering the error, removing terminal server licenses might help. Here’s what you need to do:

1. Press the Windows key + R to open the Run dialog box.
2. Type regedit and press Enter to open the Registry Editor.
3. Navigate to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing
4. Right-click on the MSLicensing folder and select Delete to remove it.
5. Confirm the deletion when prompted.
6. Restart your computer and check if the error code 0x80070035 is resolved.

7. Enable Insecure Guest Logons:

Enabling insecure guest logons can be a temporary solution to fix error code 0x80070035. However, keep in mind that this may compromise the security of your system. Proceed with caution and consider this option only if other methods fail. Here’s how you can enable insecure guest logons:

1. Press the Windows key + R, type secpol.msc, and hit Enter to open the Local Security Policy.
2. Expand Local Policies and click on Security Options.
3. Locate Network access: Let Everyone permissions apply to anonymous users in the right pane and double-click on it.
4. Select the option Enabled and click OK to save the changes.
5. Restart your computer and check if the error is resolved. Remember to revert this change after troubleshooting to restore the security of your system.

By following these steps, you can address the error code 0x80070035 “The network path was not found” on Windows 11. Remember to restart your computer after applying each solution and check if the error is resolved. If the problem persists, consider seeking further assistance from Windows support or relevant online communities.